Subtotal $0,00
- Add: Room 2108, 21 / F, Hualin building,No 201 Hualin Road, Fuzhou, Fujian
- Tel: +86-0591-22578800
- info@fibramerica.com
FAB-WF-10R Heating Strip Fiber Optic Stripping Pliers
Heating Strip Fiber Optic Stripping Pliers.
Question? Click hereTechnical Informations & PricesCompartilhe:
Place the fiber optic clamp with the ribbon fiber optic cable on the fixture table and ensure that the hot stripping clamp has been heated to the set temperature (the HEAT indicator light is always green).
• After the main cover is closed, the HEAT indicator light flashes green for about 5 seconds.
• After confirming that the green light is on, you can grip the concave parts on the main cover and fixture cover with both hands and pull the slide rail to the longest position.
• Open the main cover and fixture cover, and take out the fiber optic fixture (be careful, not to forget to clean the coating layer that has been peeled off on the hot stripping pliers).
| Model Number | FAB-WF-10R | ||||
| Warranty Time | 1 Year | ||||
| Product name | Hot jacket stripper WF-10R | ||||
| Fiber material | Silica glass | ||||
| Coating material | UV curable resin | ||||
| Coating diameter | Single core: 0.25~0.4mm; 2~12 ribbon fiber: 0.3~0.4mm | ||||
| Cladding diameter | 125um | ||||
| Coating stripping length | Max 30mm | ||||
| Fiber types | Single fiber, ribbon fiber | ||||
| Fiber holder type | FH-2,FH-4,FH-6,FH-8,FH-10,FH-12,FH-250,FH-900,FH-U (for 250/900um) |
||||
| Battery capacity | 800mAh Li-battery. Support more than 300 cycles stripping | ||||
| Dimension/Weight | 138mm (L)44mm (W)28mm (H) /300g(inlcuding battery) | ||||
| Working Temperature | 80℃, 100℃, 120℃, 140℃, | ||||
Place the fiber optic clamp with the ribbon fiber optic cable on the fixture table and ensure that the hot stripping clamp has been heated to the set temperature (the HEAT indicator light is always green).
• After the main cover is closed, the HEAT indicator light flashes green for about 5 seconds.
• After confirming that the green light is on, you can grip the concave parts on the main cover and fixture cover with both hands and pull the slide rail to the longest position.
• Open the main cover and fixture cover, and take out the fiber optic fixture (be careful, not to forget to clean the coating layer that has been peeled off on the hot stripping pliers).
| Model Number | FAB-WF-10R | ||||
| Warranty Time | 1 Year | ||||
| Product name | Hot jacket stripper WF-10R | ||||
| Fiber material | Silica glass | ||||
| Coating material | UV curable resin | ||||
| Coating diameter | Single core: 0.25~0.4mm; 2~12 ribbon fiber: 0.3~0.4mm | ||||
| Cladding diameter | 125um | ||||
| Coating stripping length | Max 30mm | ||||
| Fiber types | Single fiber, ribbon fiber | ||||
| Fiber holder type | FH-2,FH-4,FH-6,FH-8,FH-10,FH-12,FH-250,FH-900,FH-U (for 250/900um) |
||||
| Battery capacity | 800mAh Li-battery. Support more than 300 cycles stripping | ||||
| Dimension/Weight | 138mm (L)44mm (W)28mm (H) /300g(inlcuding battery) | ||||
| Working Temperature | 80℃, 100℃, 120℃, 140℃, | ||||
