• Description
• Features
• Technical Specifications
• Any questions?

Description

The FAB‑GYFXBY‑6FO is a flat aerial fiber optic cable engineered for FTTH and outdoor backbone installations. Its slim 4.3 × 8.0 mm polyethylene jacket houses a single loose tube filled with water‑blocking jelly and six ITU‑T G.657.A1 single‑mode fibers, delivering low attenuation of ≤0.35 dB/km @1310 nm and ≤0.21 dB/km @1550 nm.

Reinforcement comes from two 2.0 mm FRP rods running longitudinally, providing 1 400 N short‑term tensile strength and protection against wind‑induced oscillation. The flat design allows for easy clip‑on aerial mounting, reducing wind load and simplifying installation on poles and messenger wires.

Mechanically robust, the cable withstands 1 000 N crush force and survives static bending radii as tight as 10× its diameter (≈ 43 mm). It performs reliably across a –40 °C to +70 °C range and can be installed down to –10 °C, making it suitable for extreme environments.

Quick‑strip ripcords under the jacket facilitate fast access to the loose tube, while color‑coded fibers speed splicing and termination. The flat profile maximizes space efficiency in congested aerial pathways and duct systems.

Whether deployed in residential drop spans or long‑distance aerial backbones, the FAB‑GYFXBY‑6FO balances high performance, durability, and cost‑effectiveness for modern fiber networks.

Features

• Flat 4.3 × 8.0 mm PE jacket for space‑saving aerial runs

• Single loose tube with water‑blocking jelly and 6 G.657.A1 fibers

• Dual 2.0 mm FRP strength members for 1 400 N tensile strength

• Attenuation ≤0.35 dB/km @1310 nm, ≤0.21 dB/km @1550 nm

• Crush resistance 1 000 N; static bend radius 10× Ø; dynamic bend 20× Ø

• Operating –40 °C to +70 °C; installation down to –10 °C

• Ripcord for rapid sheath removal; color‑coded fibers for identification

Technical Specifications

Any questions?

flat aerial fiber optic cable, FAB‑GYFXBY‑6FO, loose‑tube aerial cable, FRP reinforced fiber, 6‑core outdoor fiber