Transceivers 100G CXP

The transceiver is an important part of a fiber optics network and is used to convert electrical signals to optical (light) signals and optical signals to electrical signals. It can be plugged into or embedded into another device within a data network that can send and receive a signal.

SKU 100G CXP Transceivers Categorías 06. ONU, OLT and SFP, Optical Transceiver Module Etiquetas micronodo, optical receiver

Compartilhe:

FIBRAMERICA 100GBASE-SR10 400m CXP optical transceiver is designed for use in 100-Gigabit Ethernet, 12×10-Gigabit Ethernet and 12x10G Fiber Channel links up to 400m on Multi-Mode Fiber (OM4 MMF). It is compliant with the CXP MSA, 100GBASE-SR10, 10GBASE-SR, and 10GFC standards. Digital diagnostics functions are available, as specified by the CXP MSA.

Features

Compliant to the CXP MSA Specification
12 channels full-duplex transceiver module
Supports 126.2Gb/s aggregate bit rate
Single +3.3V power supply
Integrated digital diagnostic monitoring
Low power consumption
Operating case temperature: 0 to +70°C

Application

100GBASE-SR10 100G Ethernet
12x10GBASE-SR 10G Ethernet
12x10G Fibre Channel
InfiniBand 12x SDR/DDR/QDR
Data center

Ordering Information

Type	Distance	Data Rate	Fiber	Interface	Temp.
TL-CXP-120G-SR10	400m	120G	MMF	MPO/MTP-24	0 ~ 70°C

Descripción

Features

Compliant to the CXP MSA Specification
12 channels full-duplex transceiver module
Supports 126.2Gb/s aggregate bit rate
Single +3.3V power supply
Integrated digital diagnostic monitoring
Low power consumption
Operating case temperature: 0 to +70°C

Application

100GBASE-SR10 100G Ethernet
12x10GBASE-SR 10G Ethernet
12x10G Fibre Channel
InfiniBand 12x SDR/DDR/QDR
Data center

Ordering Information

Type	Distance	Data Rate	Fiber	Interface	Temp.
TL-CXP-120G-SR10	400m	120G	MMF	MPO/MTP-24	0 ~ 70°C

Shopping cart