10G XENPAK Transceivers

The transceiver is an important part of a fiber optics network and is used to convert electrical signals to optical (light) signals and optical signals to electrical signals. It can be plugged into or embedded into another device within a data network that can send and receive a signal.

SKU: 10G XENPAK Transceivers Categories: , Tags: ,


XENPAK Modules is a legacy MSA (Multisource Agreement) fiber optic transceiver module which conforms to the 10 Gigabit Ethernet (10GbE) standard. FIBRAMERICA XENPAK Transceivers is a standardized form factor for 10 Gb/s fiber optics transponders. XENPAK Transceivers transponders are used in datacom optical links, primarily 10G Ethernet. The electrical interface to the host board is also standardized and is called XAUI (4 x 3.125 Gb/s).



  • Hot pluggable XENPAK MSA form factor
  • 70-PIN Connector with XAUI Electrical Interface
  • Digital Diagnostic Monitoring
  • Transmission distance up to 80km (SM fiber)
  • Low power consumption
  • Power supply: +5.0 V, +3.3 V, APS:+1.2 V
  • Management and control with MDIO 2-wire bus



  • 10G Ethernet
  • IP Router
  • Data communication
  • CWDM/DWDM Network
  • Other optical links


Ordering Information

Type Range Data Rate Wavelength Fiber Interface Temp.
TL-XENPAK-10G85-02D 300m 10G 850nm MMF Duplex SC 0 ~ 70°C
TL-XENPAK-10G13-20D 20km 10G 1310nm SMF Duplex SC 0 ~ 70°C
TL-XENPAK-10G15-40D 40km 10G 1550nm SMF Duplex SC 0 ~ 70°C
TL-XENPAK-10G15-80D 80km 10G 1550nm SMF Duplex SC 0 ~ 70°C
TL-XENPAK-10GCWDM-40D 40KM 10G CWDM SMF Duplex SC 0 ~ 70°C
TL-XENPAK-10GCWDM-80D 80KM 10G CWDM SMF Duplex SC 0 ~ 70°C
TL-XENPAK-10GDWDM-40D 40KM 10G DWDM SMF Duplex SC 0 ~ 70°C
TL-XENPAK-10GDWDM-80D 80KM 10G DWDM SMF Duplex SC 0 ~ 70°C


There are no reviews yet.

Be the first to review “10G XENPAK Transceivers”

Your email address will not be published. Required fields are marked *