In-Duct Microduct Bundle | FAB-7WAY-12/10

Expand pathways inside existing ducts

The FAB-7WAY-12/10 combines seven microducts in a common HDPE sheath. This documented configuration is intended for installation inside existing ducts, not specified here as a direct-buried bundle.

• Seven microducts, each 12 mm outside / 10 mm inside diameter.
• Overall bundle diameter: 39.4 ± 1.1 mm.
• 100% virgin HDPE construction and a halogen-free outer sheath.
• Low-friction inner surface for cable blowing.
• Color identification: white center; red, green, blue, yellow, grey and orange surrounding ducts.

Check the available host-duct diameter, route bends, pulling conditions and selected optical cable before installation. Ask our engineering team to confirm configuration and installation suitability.

Plan an in-duct fiber deployment

For a relevant B2B quotation, include the host duct inside diameter, route length and bends, proposed optical cable outside diameter and fiber count, bundle quantity and destination. This configuration is intended for installation inside an existing duct; do not substitute it for a direct-buried bundle without technical validation.

Request a quotation for your fiber network project.

Build a matched air-blown fiber system

Explore our FAB-GCYFXY uni-tube microduct cables, FAB-GCYFY stranded loose-tube microduct cables and FAB-T700 cable blowing machine. Select cable diameter, duct internal diameter, connectors and equipment together. Related products are not a guarantee of compatibility with every size; ask our engineering team to validate the selected configuration.