G.652.D stranded loose-tube microcable in 12–288 fiber configurations, with central FRP reinforcement, water blocking and HDPE sheath. ST-YC diameters range from approximately 5.6 to 10.1 mm.
Need a custom spec or OEM branding on this product? Talk to our engineering team.
Every batch, before shipment
Manufacturing
Custom specs and branding
Americas, Europe and Africa
FAB-GCYFY-12~288FO-ST-YC is a stranded loose-tube optical fiber microcable family for microduct deployment projects. It combines G.652.D single-mode fibers with PBT loose tubes, a central FRP strength member and a black HDPE sheath.
Configurations from 12 to 288 fibers support different capacity requirements while keeping cable diameter aligned with the selected construction. Tube-filling compound and water-blocking yarn form part of the specified cable design.
For air-blown network design, Fibramérica engineering should verify the selected cable configuration against the microduct internal diameter, installation equipment and route geometry. Blowing distance is project-dependent and is not guaranteed by fiber count or cable diameter alone.
Contact our engineering team with your planned fiber capacity and duct dimensions to select the correct version.
Cross-section image is an illustrative reference, not a scale drawing. Construction varies with fiber count. Confirm cable/microduct compatibility, installation equipment and route conditions with Fibramérica engineering before deployment. This product is a cable, not a microduct. No direct-burial suitability is implied.
| Fiber count | 12 / 24 / 36 / 48 | 96 | 144 | 288 |
|---|---|---|---|---|
| Approx. cable diameter | 5.6 mm | 6.6 mm | 7.7 mm | 10.1 mm |
| Approx. cable weight | 30 kg/km | 40 kg/km | 50 kg/km | 90 kg/km |
| Loose-tube arrangement | 1 / 2 / 3 / 4 tubes | 8 tubes | 6 tubes | 9 + 15 tubes |
| Fibers per tube | 12 | 12 | 24 | 12 |
| Specified tension load | 150 N | 500 N | 800 N | 800 N |
| Model family | FAB-GCYFY-12~288FO-ST-YC |
|---|---|
| Fiber type | Single-mode, ITU-T G.652.D |
| Construction | PBT loose tubes with tube-filling compound, central FRP strength member and water-blocking yarn |
| Outer sheath | Black HDPE |
| Maximum attenuation at 1310 / 1550 nm | 0.36 / 0.22 dB/km |
| Operation and storage temperature | −20 °C to +70 °C |
| Installation temperature | −15 °C to +60 °C |
Dimensions and load values refer to the ST-YC configuration only. Confirm the applicable bending radius and installation limits with engineering before cable installation; no unverified bend-radius value is specified here.
Our engineering team can confirm compatibility, custom specs and OEM branding options.
